MoTeC C1212 Display

AUD $4,434.67 ex. GST

  • 12-inch full colour, high resolution display/logger/controller

  • Optional 120 MB internal and USB logging, up to 500 samples/sec

  • Composite video input, selectable layouts, and Display Creator support

  • CAN and RS232 communications, with expandability via MoTeC modules

Upgrade Options:

Description

MoTeC C1212 Colour Display Logger (18054)

The C1212 is the largest screen in MoTeC’s colour display range. It’s a 12-inch high-resolution TFT display that pulls data from your ECU and other CAN devices and shows it clearly, even in direct sunlight. It shows data channels, warning alarms, lap times, fuel calculations, minimum corner speeds and maximum straight speeds.

The C1212 ships as a display and control unit. With the logging upgrade, it becomes a fully programmable data logger with 120 MB of memory. The USB logging option adds more capacity and lets you pull data straight off a removable drive. The C1212 is upgradeable, so you can start with a display and add logging, I/O, custom graphics and telemetry later without replacing the unit.

The large screen and IP67 rating make it suited to larger vehicles, marine and industrial use. It can also replace the factory instrument cluster in modern vehicles.

Motec C1212 Display Specs

  • 310 mm (approx. 12″) colour TFT LCD, anti-reflective
  • 1280 x 480 resolution with anti-aliased graphics
  • High brightness for sunlight readability
  • Selectable fixed layouts with configurable channels and labels
  • Fixed layouts include a dedicated live video window on the right of the screen
  • 48 user-defined, scrollable message lines with programmable overrides
  • 3 programmable modes with customisable labels (for example, Practice, Warm-Up and Race)
  • Full screen customisation available with the Display Creator upgrade

Video Input

A composite video input lets you show live footage on screen, such as from a rear view camera. In the fixed layouts the video window stays blank when no camera is connected, and that area can’t be used for other channels. Display Creator removes that restriction.

Motec C1212 Data Logging (Upgrade Required)

  • 120 MB internal logging memory (29858 upgrade)
  • USB logging to a removable storage device (29813 upgrade)
  • Logging rates up to 500 samples per second
  • Fast Ethernet download
  • i2 Standard data analysis software included, with i2 Pro available as an upgrade

For USB logging, MoTeC recommends its 32 GB or 64 GB USB Data Plug. It’s mechanically latched, waterproof and built to handle vibration and exposure to the elements.

Inputs and Outputs

Standard

  • 2 x digital inputs
  • 3 x speed inputs
  • 1 x composite video input

With I/O upgrade (29840)

  • 6 x analogue voltage inputs (4 x 0–5.46 V, 2 x 0–15 V)
  • 2 x analogue temperature inputs
  • 4 x low side outputs, PWM or switched, 0.5 A max, current limited and thermal overload protected

Need more I/O? The C1212 is fully compatible with MoTeC E888 and E816 expanders.

Internal Sensors

  • 3-axis accelerometer (±5 G)
  • Dash temperature sensor
  • Sensor supply voltage
  • Battery voltage

Communications

  • 2 x configurable CAN buses with individually programmable bus speeds
  • 2 x RS232 ports (one transmit and receive, one receive only)
  • Ethernet for configuration and data download

Additional Features

  • GPS lap timing
  • Wideband lambda support from MoTeC PLMs or LTCs
  • T2 Telemetry support (with upgrade)

Optional Upgrades

  • 29840 – C1212 I/O
  • 29858 – C1212 120 MB Logging
  • 29813 – C1212 USB Logging
  • 29856 – C1212 Display Creator
  • 29860 – C1212 Pro Analysis (i2 Pro)
  • 29863 – C1212 T2 Telemetry

Compatibility

  • MoTeC ECUs: all models. Current ECUs connect via CAN. Older M4, M48 and M8 ECUs connect via RS232, and some may need a PCI cable
  • MoTeC displays and loggers: all
  • MoTeC expanders: E816 and E888
  • MoTeC accessories: SLM, PLM, LTC, BR2, PDM, GPS, ADR2, V2 and more
  • Many non-MoTeC CAN devices

Software

  • Dash Manager (Windows): configures inputs, outputs, display, logging and calculations. Also handles channel monitoring and firmware updates
  • i2 Standard: data analysis software, included
  • Display Creator: full screen layout customisation, custom graphics and imported logos (upgrade)
  • i2 Pro and T2 Telemetry (upgrades)

Specifications

  • Operating voltage: 6–32 V DC
  • Operating current: 0.5 A typical at 14 V (excluding sensors)
  • Reverse battery and battery transient protection
  • Sensor supplies: 5 V and 8 V, 0.25 A max each
  • Internal operating temperature: -20 °C to 70 °C
  • Ingress protection: IP67 (all unused connector cavities must be plugged)
  • Dimensions: 340.8 x 144.1 x 34 mm (excluding connector)
  • Weight: 1690 g
  • Connectors: 1 x 34-pin waterproof connector (mating connector 65044), 1 x mini USB port on the rear

What’s in the Box

  • MoTeC C1212 Colour Display Logger (18054)
  • i2 Standard data analysis software (free download)

Logging, I/O, Display Creator, Pro Analysis and Telemetry are sold separately as upgrades. Looms and the mating connector aren’t included.

Recommended Accessories

  • 62204 – C12X Race Loom Terminated
  • 61259 – C12X Input Loom
  • 61279 – USB Logging Cable 1.5 m (panel mount)
  • 61607 – 64 GB USB Data Plug

Applications

Suited to circuit, drag, rally and endurance race cars, as well as street-registered performance builds replacing a factory cluster. It also works in marine and industrial applications that need a large, configurable display and logging system. Available standalone or as part of the C1212 Race Display Kit (18056) and Race Logging Kit (18057).