Link ECU Plugin G4X MINI BMW Mini Cooper S 2002-2006 – 209-4000

Link ECU Plugin G4X MINI BMW Mini Cooper S 2002-2006 – 209-4000

Easy to install. Affordable. Reliable.
G4X PlugIn ECUs deliver the latest in engine management technology, designed to easily maximise the performance potential of your vehicle.

The Link G4X MINI-X ECU comes in its own case and fits directly into the factory location.
Installation is straightforward — no alteration of the factory wiring loom is required for the models listed below.

Vehicle Compatibility

Engine: R50–R53 Tritec 1.6L Supercharged
Transmission: Manual only

The MINI-X Automotive Computer Unit is specifically designed for R50–R53 MINI Hatch models equipped with the 1.6L SC engine.

Please ensure your pinout connector matches the header shown in the listed product photo before purchasing.

Note: Chronopack dash option is not currently supported.

An XS Loom and 4 Bar MAP Sensor are highly recommended (sold separately).
Most factory features are supported — refer to the Features section for I/O expansion options.

Suitable Applications

• MINI R50 Hatch (1.6L SC)

• MINI R52 Convertible (1.6L SC)

• MINI R53 Cooper S (1.6L SC)

G4X PlugIn Key Features (where applicable)

Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features – antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune – automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost, and fuel
Real-time selectable dual fuel, ignition, and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance, or optical
Boost control referenced to gear, speed, or throttle position
512 megabytes of onboard data logging memory
Staged injection
Knock control with “windowing”

I/O Expansion Options

The following expansion connector inputs and outputs are provided:

Aux 1 – Auxiliary Output
DI 8 – Digital Input
DI 9 – Digital Input
An Temp 3 – Temperature sensor input
An Temp 4 – Temperature sensor input
An Volt 10 – Analog 0–5V input
An Volt 11 – Analog 0–5V input
+5V Out – Low current +5V supply
GND – Sensor ground only

For installation details, refer to the PC Link Help File regarding Expansion Cable setup.