VENOM FG TURBO 100CPSI CAT PIPE

The Venom FG Turbo Cat pipe is a direct bolt on replacement for the factory cat pipe found on FG XR6Ts and F6s. It is constructed from 304 grade stainless steel and utilises our 500 Series 5 inch body 100 CPSI Metal Core Cat. The factory cat with its restrictive ceramic substrate is the main limiting factor in the FG’s exhaust. By designing a complete bolt in replacement that integrates flawlessly with the standard exhaust system, it provides the perfect addition for those chasing power in the 290-330rwkw region.

**Vehicle must be custom tuned to run this cat otherwise it will over boost and engine damage may result**

The standard exhaust found on the FG’s is quite capable for a factory item and its cross sectional area of 3” provides good flow for power levels up to 330rwkw. Also, in the case of the FG XR6T, the standard GT3576 Turbo runs out of efficiency at around the same power level (On 98 Octane Fuel). The Venom Bolt-on cat pipe will therefore allow you to get the most out of your FG without the need to change to a larger exhaust system or dump pipe or even having to port the factory internal wastage to allow for consistent boost control. Most tuners advise this to be done when fitting a larger free flowing dump pipe and exhaust system.

The other key benefits of the FG bolt on pipe include no messy cutting or welding and no extra flanges. Best of all, you can easily return the car back to stock if the need arises and even refit your original heat shields to the new cat.

The High Flow Cat on this piece is made from 304 grade stainless and utilises a large 5” body metal core substrate. This substrate, as well as being welded to the casing, is also welded along the inner edges for extra strength, helping to prevent core substrate shift. By working with the standard exhaust system, the higher flowing substrate provides a deeper more purposeful exhaust note under acceleration whilst remaining quiet under cruising conditions.